The best thermalbinding machines will have both an audible and a visual signal showingthe completion

Thermal binding is one of the mostprofessional desktop binding systems available on the market. However,choosing the right thermal binding machine for your office cansometimes be difficult. Every machine seems to have its ownCentrifugal Barrel Finishing Machine Suppliers set offeatures and benefits and it can sometimes be difficult to sort throughthem all. This article is designed to help you understand five of themost important features to look for in a thermal binding machine. Herethey areTimer: Most thermal binding machines have abuilt in timer that times the binding cycle and lets you know when itis finished. However, a few cheaper units do not have an automatictimer built in. These units require you to time the documents yourselfwhich makes the binding process much more difficult.

The best thermalbinding machines will have both an audible and a visual signal showingthe completion of the binding process. Throat Size: Inorder to choose the right binding machine for your needs you will needto anticipate the types of documents that you plan on binding. If youplan on binding documents that are thicker than one inch you will needto make sure that you buy a thermal binding machine that can handle theextra thickness. Thermal binding machines are usually available fordocuments up to 1” thick and for documents up to 2” thick.Binding Length: Most thermal binding machines are designed for bindingdocuments that are 11” in length. However, if you plan on bindingdocuments that are longer than 11” you will need a larger bindingmachine.

Thermal binding machines are available in widths up to 14” toaccommodate legal sized documents. However, larger sized machines arealso required for binding 12” x 12” photobook covers and otheroversized thermal binding covers. Temperature Setting:Most thermal binding machines do not have adjustable temperaturesettings. However, if you plan on binding hard covers with your thermalbinding machine you will want to make sure that it will provideadequate heat to melt the glue through the chip board used in the hardcover. Some thermal binding machines provide a higher heat setting forbinding hard covers. If the machine does not have a higher heat settingand is not specifically designed for binding hard covers you may needto run the hard cover case through the binding machine a second time toensure that the glue is properly activated. Cooling Rack:Most thermal binding machines come with a cooling rack to hold yourdocuments while they cool. After checking to make sure that the machineyou are considering comes with a cooling rack it is important to checkand see how many documents the cooling rack can hold, whether thecooling rack is attached to the machine and what the cooling rack ismade of. Plastic cooling racks attached to the binding machine canbreak off over time while separate metal cooling racks will dissipateheat faster and can also serve as a document jogger to ensure a higherquality bind.These five features are useful in comparing the different thermalbinding machines available on the market. Using these features youshould be able to better decide what thermal binding unit is bestsuited for your organization.

This is a trick to be done on a leg curl machine. By simply changing where you grip your hands on the machine, you can increase your strength in the movement by as much as 10% instantly! Lie face down on the bench as you normally would when doing the exercise. Instead of gripping the machine on the handles below the bench with your arms bent, extend your arms straight overhead in front and grab on to whatever is there. This is generally the frame on either side of the weight stack. Be aware that this trick will not work if there is nothing there to grab - some machines just end at the bench and have the weights stack to the side or behind. Do your leg curls as you usually would but using this different grip. You should feel stronger when doing them. One of the best ways to see this principle in action is to do a set as you normally would with your normal grip for about 10 to 12 reps. When you can’t do any more reps, switch to the grip as explained above. You should be able to get a few more reps out. When using this grip you should also find that you can use a little more weight than you usually do for reps. The reason this trick works is that having your arms straight removes your biceps as the limiting link in the exercise. It transfers the force through your stronger back muscles instead, resulting in instant increased strength!

The best thermalbinding machines will have both an audible and a visual signal showingthe completion

It is especially beneficial during the summer and winter